Resolve Carpet Cleaner, Heavy Traffic Foam

Product details

Foaming action. Lifts tough messes. 5x benefits vs. vacuuming alone. Easy deep cleaning for wide areas. Helps prevent resoiling. Neutralizes odors. Deep cleans. Removes 5x more dirt. Freshens. Newer looking carpets. No. 1 carpet cleaning brand (Based on Nielsen data ending 52 weeks 05/06/20 unit sales of manual and machine formulas). Contains no phosphorus.

Warning

Caution: Contents under pressure. Read precautions on back. When using Resolve Easy Clean Brushing Kit, direct aerosol away from face when loading the device and replacing the spray cap to can.,Caution: May cause eye irritation. Contents under pressure. Do not spray towards face. Avoid contact with eyes and skin. Container may explode if heated. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F, as the container may burst.,First Aid: If in eyes, immediately rinse eyes with plenty of water. Remove contact lenses and continue to rinse for at least 15 minutes. If irritation persists, get medical attention.,Keep out of reach of children and pets.

Additional info

How to Use: 2 ft = 24 Inches: Shake well & spray; Work in the foam using a brush or damp, colorfast mop; Leave for 2 hours, or until dry, then vacuum. Resolve Heavy Traffic Foam Carpet Cleaner is safe to use on wool, nylon and stain-resistant carpet. Before Cleaning: Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color is affected, do not use. For upholstery, look for manufacturer's cleanability code tag. Use on fabrics coded WS or W. If coded X or S do not use. Not recommended for use on velvet, silk, vinyl, or leather. Do not use Resolve Easy Clean Brushing Kit on any surface other than carpets. Do not spray directly on pets. Use only in well-ventilated areas. Keep children and pets off carpet until dry. Directions: Large Area Carpet Cleaning: 1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work on the foam into carpet in two directions using a damp mop, colorfast mop. 3. Repeat steps 1 & 2 until the entire area is cleaned. 4. When dry, vacuum thoroughly to remove dried foam and loosened dirt. For Use in Resolve Easy Clean Brushing Kit: 1. Remove spray cap from Resolve Heavy Traffic Foam 22oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position. 3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can for standard use. Upholstery Cleaning: 1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not overwet fabrics. Hint: To avoid rings, clean entire section where soil occurs. 4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use. 5. Only use spray cap to dispense foam for upholstery cleaning. To ensure complete dispensing during life of product, tilt can downwards at approximately 60 feet while spraying. Contents will clean a carpeted area of 168 square feet (12 inch x 14 inch). If accidentally sprayed on wood furniture, just wipe off. For Best Results: Use vacuum cleaner with a fresh, empty bag.